My Experience Resurfacing A Fiberglass Bathtub

My Experience Resurfacing A Fiberglass Bathtub

A few months ago, I moved into an old house with a outdated and damaged fiberglass bathtub. I knew I didn’t have the budget to replace it, but I also couldn’t stand the thought of taking a bath in something so dingy and worn out. So, I decided to take matters into my own hands and attempt to resurface the bathtub myself. After some research and a lot of trial and error, I finally found a method that worked. In this article, I will share my step-by-step guide, top tips and ideas, pros and cons, and personal review on how to resurface a fiberglass bathtub.

Step-by-Step Guide on How to Resurface a Fiberglass Bathtub

Step 1: Clean the Bathtub

The first step is to thoroughly clean the bathtub using a non-abrasive cleaner. Make sure to remove any soap scum, dirt, or grime that may have built up over time. Rinse the bathtub with water and let it dry completely.

Step 2: Sand the Bathtub

Using a fine-grit sandpaper, lightly sand the entire surface of the bathtub. This will help the new finish adhere to the old surface. After sanding, rinse the bathtub with water and let it dry completely.

Step 3: Apply the Resurfacing Kit

Follow the instructions on the resurfacing kit carefully. Apply the first coat evenly to the bathtub using a roller or brush. Let it dry completely before applying the second coat. Repeat this process until you achieve the desired finish.

Step 4: Let It Cure

After applying the final coat, let the bathtub cure for at least 24 hours. Avoid using the bathtub during this time.

Top 10 Tips and Ideas on How to Resurface a Fiberglass Bathtub

Choose a high-quality resurfacing kit.
Follow the instructions on the kit carefully.
Make sure to clean and sand the bathtub properly before applying the new finish.
Use a roller or brush to apply the new finish evenly.
Avoid using the bathtub for at least 24 hours after applying the final coat.
Consider adding a non-slip surface to the bathtub for safety.
Protect your skin and eyes by wearing gloves and goggles.
Avoid using abrasive cleaners on the resurfaced bathtub.
Regularly clean the bathtub to maintain the new finish.
If unsure, consult a professional.

Pros and Cons of Resurfacing a Fiberglass Bathtub

Pros:

Cost-effective alternative to replacing the bathtub entirely.
Easy to do yourself with the right tools and instructions.
Can give an old and worn-out bathtub a new life.

Cons:

The finish may not last as long as a new bathtub.
Requires proper preparation and application to achieve a satisfactory result.
May not be suitable for severely damaged or cracked bathtubs.

My Personal Review and Suggestion on How to Resurface a Fiberglass Bathtub

Overall, I am very pleased with the results of resurfacing my fiberglass bathtub. It was a cost-effective solution that gave my bathtub a new life. However, I must warn that the process can be time-consuming and requires proper preparation and application. For those who are not comfortable doing it themselves, I suggest consulting a professional.

Question & Answer and FAQs

Q: Is it safe to resurface a fiberglass bathtub?

A: Yes, it is safe as long as you follow the instructions on the resurfacing kit and take proper precautions, such as wearing gloves and goggles.

Q: How long does the new finish last?

A: The durability of the new finish depends on the quality of the resurfacing kit and how well it is applied. With proper maintenance, it can last several years.